ISO 15118-5:2018 en

  • Deze norm is ingetrokken sinds 01-05-2018

182,40 198,82 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 403
Commissie Wegvoertuigen
Gepubliceerd op 01-03-2018
Taal Engels
ISO 15118-5 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an Electric Vehicle or Supply Equipment Communication Controller (EVCC or SECC) with support for PLC‐based High Level Communication (HLC) and Basic Signaling according to ISO 15118‐3. These conformance tests specify the testing of capabilities and behaviors of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118‐3 and against what the implementer states the SUT implementation's capabilities are. The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118‐3. The behavior tests of the ATS examine an implementation as thoroughly as is practical over the full range of dynamic conformance requirements defined in ISO 15118‐3 and within the capabilities of the SUT (see NOTE 1). A test architecture is described in correspondence to the ATS. The conformance test cases in this part of the standard are described leveraging this test architecture and are specified in TTCN‐3 Core Language for the ISO/OSI Physical and Data Link Layers (Layers 1 and 2). The conformance test cases for the ISO/OSI Network Layer (Layer 3) and above are described in ISO 15118‐4. In terms of coverage, this document only covers normative sections and requirements in ISO 15118‐3. This document can additionally include specific tests for requirements of referenced standards (e.g. IEEE, or industry consortia standards) as long as they are relevant in terms of conformance for implementations according to ISO 15118‐3. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118‐3. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the test cases defined in this document only consider the communication protocol and the system's behavior defined ISO 15118‐3. Power flow between the EVSE and the EV is not considered.


ICS-code 43.120
Nederlandse titel
Engelse titel Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test
Vervangen door



Ga naar winkelwagen