Norm

ISO 16526-2:2011 en

Niet-destructief onderzoek - Meting en evaluatie van de spanning van de röntgenbuis - Deel 2: Controle van de constantheid met de dikke-filtermethode

31,57

Over deze norm

Status Definitief
Aantal pagina's 5
Gepubliceerd op 15-12-2011
Taal Engels
This part of ISO 16526 ??specifies a constancy check of a X-ray system where mainly the X-ray voltage is checked and the tube current and the constitution of the target which can be changing due to ageing of the tube. The thick filter method is based on a measurement of the dose rate behind a defined thick filter using defined distances between the X-ray tube, the filter and the measuring device. This method is very sensitive to changes of the voltage, but it does not provide an absolute value for the X-ray tube voltage. Therefore, a reference value is needed and, it is recommended to find this reference, for example, within the acceptance test of the system. The thick filter method is a rather simple technique and may be applied by the operator of an X-ray system to perform regularly a constancy check of the system. The method can also be applied for consistency checks after changing components which may affect the X-ray tube voltage. This method can be applied for all types of X-ray systems, i. e. for constant potential, half wave and impulse wave generators with a tube current larger than 1 mA.

Details

ICS-code 19.100
Nederlandse titel Niet-destructief onderzoek - Meting en evaluatie van de spanning van de röntgenbuis - Deel 2: Controle van de constantheid met de dikke-filtermethode
Engelse titel Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen