Norm

ISO 21307:2009 en

Buizen en hulpstukken van kunststof - Stuiklasafdichtingsprocedures voor polyetheen (PE) buizen en hulpstukken gebruikt in constructies van gas- en waterdistributiesystemen

  • Deze norm is ingetrokken sinds 23-05-2011

73,12

Over deze norm

Status Ingetrokken
Aantal pagina's 13
Commissie Kunststofleidingsystemen voor gasvoorzieningen
Gepubliceerd op 15-01-2009
Taal Engels
This International Standard establishes general principles regarding the process used in the construction and quality assessment of butt fusion joints incorporating fittings (ISO 8085-2) and pipes used in the construction of gas (ISO 4437) and water (ISO 4427) distribution systems, made from PE 80 and PE 100 materials having a melt flow rate at 190 °C/5 kg of between 0,3 g/10 min and 1,7 g/10 min, with equipment which complies with ISO 12176-1 and installed in accordance with ISO/TS 10839. Specifically, this International Standard specifies a number of proven butt fusion jointing procedures for pipes and fittings with a wall thickness up to and including 70 mm. This International Standard takes into consideration the materials and components used, the fusion jointing procedure and equipment and the quality assessment of the completed joint. This International Standard can be applied in conjunction with appropriate national regulations and standards.

Details

ICS-code 23.040.20
23.040.45
75.200
93.025
Nederlandse titel Buizen en hulpstukken van kunststof - Stuiklasafdichtingsprocedures voor polyetheen (PE) buizen en hulpstukken gebruikt in constructies van gas- en waterdistributiesystemen
Engelse titel Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen