Norm

ISO 28057:2014 en

Dosimetrie met solide thermoluminescentie detectoren voor foton en elektronische straling in radiotherapie

131,28

Over deze norm

Status Definitief
Aantal pagina's 40
Gepubliceerd op 01-03-2014
Taal Engels
This International Standard describes rules for the procedures, applications, and systems of thermoluminescence dosimetry (TLD) for dose measurements according to the probe method. It is particularly applicable to solid “TL detectors”, i.e. rods, chips, and microcubes, made from LiF:Mg,Ti or LiF:Mg,Cu,P in crystalline or polycrystalline form. It is not applicable to LiF powders because their use requires special procedures. The probe method encompasses the arrangement, particularly in a water phantom or in a tissue-equivalent phantom, of single TL detectors or of “TL probes”, i.e. sets of TL detectors arranged in thin-walled polymethyl methacrylate (PMMA) casings. The purpose of these rules is to guarantee the reliability and the accuracy indispensable in clinical dosimetry when applied on or in the patient or phantom. This International Standard applies to dosimetry in teletherapy with both photon radiation from 20 keV to 50 MeV and electron radiation from 4 MeV to 25 MeV, as well as in brachytherapy with photon-emitting radionuclides. These applications are complementary to the use of ionization chambers.

Details

ICS-code 13.280
Nederlandse titel Dosimetrie met solide thermoluminescentie detectoren voor foton en elektronische straling in radiotherapie
Engelse titel Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen