Norm

ISO 30011:2010 en

Werkplekatmosfeer - Bepaling van metalen en metallo├»den in deeltjes in lucht met inductief gekoppeld plasma -massaspectrometrie

114,67

Over deze norm

Status Definitief
Aantal pagina's 34
Commissie Werkplek- en buitenluchtmetingen
Gepubliceerd op 01-10-2010
Taal Engels
This International Standard specifies a procedure for the use of quadrupole inductively coupled plasma mass spectrometry (ICP-MS) for analysing test solutions prepared from samples of airborne particulate matter collected as specified in ISO 15202-1. Method development, performance checks, and a routine analysis method are specified. Test solutions for analysis by this International Standard are prepared as specified in ISO 15202-2. This International Standard is applicable to the assessment of workplace exposure to metals and metalloids for comparison with limit values (see e.g. EN 689[10], ASTM E1370[8]). The following is a non-exclusive list of metals and metalloids for which limit values have been set (see Reference [15]) and for which one or more of the sample preparation methods specified in ISO 15202-2 and the analytical procedure described in this International Standard are applicable. However, there is no information available on the effectiveness of any of these sample preparation methods for those elements listed in italics.

Details

ICS-code 13.040.30
Nederlandse titel Werkplekatmosfeer - Bepaling van metalen en metallo├»den in deeltjes in lucht met inductief gekoppeld plasma -massaspectrometrie
Engelse titel Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen