Norm

ISO 3452-1:2008 en

Niet-destructief onderzoek - Penetrantonderzoek - Deel 1: Algemene uitgangspunten

  • Deze norm is ingetrokken sinds 11-06-2013

48,19

Over deze norm

Status Ingetrokken
Aantal pagina's 9
Gepubliceerd op 01-09-2008
Taal Engels
This standard defines a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc. This standard is not intended to be used for acceptance criteria and gives no information relating to the suitability of individual test systems for specific applications nor requirements for test equipment. The term `discontinuity' is used here in the sense that no evaluation concerning acceptability or non-acceptability is included. Methods for determining and monitoring the essential properties of penetrant testing products to be used are specified in EN 571-2 and EN 571-3.

Details

ICS-code 19.100
Nederlandse titel Niet-destructief onderzoek - Penetrantonderzoek - Deel 1: Algemene uitgangspunten
Engelse titel Non-destructive testing - Penetrant testing - Part 1: General principles
Vervangt
Wordt vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen