Norm

ISO 4548-5:2013 en

Doorstroom-smeeroliefilters voor inwendige verbrandingsmotoren - Deel 5: Simulatie van de koude start duurzaamheid onder hydraulische pulsen

48,19

Over deze norm

Status Definitief
Aantal pagina's 8
Gepubliceerd op 15-07-2013
Taal Engels
This part of ISO 4548 specifies a method of testing the ability of full-flow lubricating oil filters for internal combustion engines to withstand an internal pressure surge such as occurs when an engine is started from cold, and cyclic internal pressure variations experienced during operation. These tests are intended for application to spin-on type filters and detachable filters with disposable elements with a maximum flow rate of 100 l/min. The tests can be applied to other filters, if thought applicable, by agreement between the filter manufacturer and the purchaser. NOTE This test is not intended to replace simulated environmental testing (e.g. at very low temperatures). If such testing is required, it will be the subject of negotiation between the supplier and customer.

Details

ICS-code 27.020
Nederlandse titel Doorstroom-smeeroliefilters voor inwendige verbrandingsmotoren - Deel 5: Simulatie van de koude start duurzaamheid onder hydraulische pulsen
Engelse titel Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 5: Test for cold start simulation and hydraulic pulse durability
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen