Norm

ISO 5347-7:1993 en

Methods for the calibration of vibration and shock pick-ups - Part 7: Primary calibration by centrifuge

  • Deze norm is ingetrokken sinds 06-06-2016

31,57

Over deze norm

Status Ingetrokken
Aantal pagina's 5
Gepubliceerd op 16-12-1993
Taal Engels
Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using centrifuge calibration. Applies to rectilinear accelerometers with zero-frequency response, mainly of the strain gauge or piezoresistive type, and to primary standard and working pick-ups. Is applicable for a calibration range from 10 m/s<(hoch)2> to 1000 m/s<(hoch)2> (higher accelerations possible) at 0 Hz. The limits of uncertainty applicable are ± 1 % of reading.

Details

ICS-code 17.160
Nederlandse titel Methods for the calibration of vibration and shock pick-ups - Part 7: Primary calibration by centrifuge
Engelse titel Methods for the calibration of vibration and shock pick-ups - Part 7: Primary calibration by centrifuge
Wordt vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen