Norm

ISO 5951:2008 en

Hot-rolled steel sheet of higher yield strength with improved formability

  • Deze norm is ingetrokken sinds 29-05-2013

48,19

Over deze norm

Status Ingetrokken
Aantal pagina's 8
Commissie Chemische analyse van ijzer en staal
Gepubliceerd op 15-08-2008
Taal Engels
This International Standard applies to all grades of continuously hot-rolled steel sheet of higher yield strength with improved formability. The steel is killed, made according to a fine grain practice and has a suitable chemical composition, including microalloying elements, to provide improved formability. The product is intended for the fabrication of parts requiring better formability than is provided by normal high yield strength steel sheet. It is generally used in the delivered condition. Because of the combination of higher strength and improved formability, it is possible to obtain savings in mass along with better weldability. This product is commonly produced in the range of thicknesses of 1 mm to 6 mm and in widths of 600 mm and over, in coils and cut lengths. Hot-rolled sheet less than 600 mm wide may be slit from wide sheet and will be considered as sheet.

Details

ICS-code 77.140.50
Nederlandse titel Hot-rolled steel sheet of higher yield strength with improved formability
Engelse titel Hot-rolled steel sheet of higher yield strength with improved formability
Vervangt
Wordt vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen