Norm

ISO 7148-1:1999 en

Glijlagers - Beproeven van tribologisch gedrag van lagermaterialen - Deel 1: Beproeven van lagermetalen

  • Deze norm is ingetrokken sinds 11-10-2012

48,19

Over deze norm

Status Ingetrokken
Aantal pagina's 9
Gepubliceerd op 01-11-1999
Taal Engels
Specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication. The test procedures described in this standard enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations, thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another. The test results give useful information for practical application only if all parameters of influence are identical. The more the test conditions deviate from the actual application the greater will be the uncertainty of the applicability of the results.

Details

ICS-code 21.100.10
Nederlandse titel Glijlagers - Beproeven van tribologisch gedrag van lagermaterialen - Deel 1: Beproeven van lagermetalen
Engelse titel Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals
Wordt vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen