Norm

ISO 727-2:2002 en

Hulpstukken van ongeplasticeerd poly(vinyl chloride) (PVC-U), gechloreerd poly(vinyl chloride) (PVC-C) of acrylonitrile-butadiëen-styreen (ABS) met vlakke moffen voor drukleidingen - Deel 2: Inch-reeks

  • Deze norm is ingetrokken sinds 01-06-2005

31,57

Over deze norm

Status Ingetrokken
Aantal pagina's 6
Commissie Kunststofleidingsystemen
Gepubliceerd op 01-05-2002
Taal Engels
This part of ISO 727 specifies the dimensions, in millimetres, of plain sockets (cylindrical and conical), for the inchbased pipe series, in fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS), intended for connecting by solvent cementing to pipes of the corresponding material for use under pressure. The resulting joint does not require mechanical anchorage. It is strongly recommended that the advice of the fittings manufacturer be sought in the selection of an appropriate type of solvent cement, depending upon whether the cylindrical or conical type of socketed fitting is being used for a particular installation.

Details

ICS-code 23.040.45
Nederlandse titel Hulpstukken van ongeplasticeerd poly(vinyl chloride) (PVC-U), gechloreerd poly(vinyl chloride) (PVC-C) of acrylonitrile-butadiëen-styreen (ABS) met vlakke moffen voor drukleidingen - Deel 2: Inch-reeks
Engelse titel Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen