Over deze norm
This International Standard specifies methods of test for joints with a locked socket and spigot, including doublesocket joints, and with elastomeric seals, for buried and non-buried glass-reinforced thermosetting plastics (GRP) piping systems. This standard is applicable only to the joint, and specifies methods of test to prove its design. It assumes that the joint will be exposed to the effects of hydrostatic end thrust. The tests, detailed in 7.2 to 7.6, are applicable to locked socket-and-spigot joints intended to be used in buried or non-buried applications. With the exception of the bending test (7.5), these tests are applicable to joints with pipes and fittings of all nominal sizes. The test detailed in 7.5 is applicable to joints with pipes and fittings up to and including DN 600. The tests are suitable for evaluating joints intended for applications in which liquids are conveyed at particular temperatures specified in the referring specification.
|Nederlandse titel||Met glasvezel versterkte thermohardende kunststoffen leidingen en hulpstukken - Beproevingsmethoden voor de beoordeling van het ontwerp voor spie-mofverbindingen, inclusief dubbele mofverbinding, met elastomerische afdichtingen|
|Engelse titel||Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals|
|Wordt vervangen door|