Norm

ISO 8267-2:2015 en

Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft

  • Deze norm is ingetrokken sinds 30-08-2016

31,57

Over deze norm

Status Ingetrokken
Aantal pagina's 6
Commissie Lucht- en ruimtevaart
Gepubliceerd op 15-10-2015
Taal Engels
ISO 8267-2 specifies the interface requirements for tow bar attachment fittings on the nose gear (when towing operations are performed from the nose gear) of conventional tricycle type landing gears of commercial civil transport aircraft. Its purpose is to achieve tow bar attachment fittings interface standardization by aircraft mass category (which determines tow bar forces) in order to ensure that a single type of tow bar with a standard connection can be used for all aircraft types within or near that mass category, so as to assist operators and airport handling companies in reducing the number of different tow bar types used. This part of ISO 8267 is applicable to all new models of regional aircraft within the specified maximum ramp mass range which enter service or are designed after its date of publication. It does not apply to previously in service regional aircraft models, which present a considerable variety of tow bar attachment fittings. However, a simple retrofit modification is described that may make certain in-service fittings compatible with a tow bar head in conformity with this part of ISO 8267, where deemed appropriate in order to facilitate operation of such aircraft types at airports.

Details

ICS-code 49.100
Nederlandse titel Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft
Engelse titel Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen