Norm

ISO 900:1977 en

Aluminium oxide primarily used for the production of aluminium - Determination of titanium content - Diantipyrylmethane photometric method

31,57

Over deze norm

Status Definitief
Aantal pagina's 4
Gepubliceerd op 01-10-1977
Taal Engels
Applicable to all products having a titanium dioxide content of equal to or more than 0.001 % (m/m). Describes the preparation of the diantipyrylmethane solution and the preparation of the titanum standard solution. The procedure of the preparation of a principal solution or the chemical analysis by an alkaline fusion is carried out according to ISO 804 replacing the nitric acid solution by the sulphuric one. After extraction of the fused mass with sulphuric acid solution formation of the titanium-diantipyrylmethane complex (approximately 4.6 N solution). Photometric measurement of the coloured complex at a wavelength of about 420 nm. Has also been approved by the IUPAC. Replaces and cancels ISO Recommendation R 900/1968 of which it constitutes a technical revision.

Details

ICS-code 71.100.10
Nederlandse titel Aluminium oxide primarily used for the production of aluminium - Determination of titanium content - Diantipyrylmethane photometric method
Engelse titel Aluminium oxide primarily used for the production of aluminium - Determination of titanium content - Diantipyrylmethane photometric method

Winkelwagen

Subtotaal:

Ga naar winkelwagen