Norm

ISO 9364:2001 en

Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities

  • Deze norm is ingetrokken sinds 01-09-2006

98,05

Over deze norm

Status Ingetrokken
Aantal pagina's 21
Commissie Vervormingsstaal
Gepubliceerd op 15-11-2001
Taal Engels
1.1 This International Standard specifies the characteristics of steel of commercial, drawing and structural qualities coated by a continuous hot-dip aluminium/zinc alloy coating process. The aluminium/zinc alloy composition by mass is nominally 55 % aluminium, 1,6 % silicon and the balance zinc. The product is intended for applications where the corrosion characteristics of aluminium coupled with those of zinc are desired. 1.2 Aluminium/zinc-coated steel sheet is produced in thicknesses up to 5 mm after coating, and in widths of 600 mm and over in coils and cut lengths. Aluminium/zinc-coated steel sheet less than 600 mm wide may be slit from wide sheet and will be considered as sheet.

Details

ICS-code 77.140.50
Nederlandse titel Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
Engelse titel Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen