Norm

ISO/ASTM 51631:2003 en

Richtlijn voor het gebruik van calorimetrische dosimetriesystemen voor dosismetingen van elektronenbundels en kalibraties van dosimeters

  • Deze norm is ingetrokken sinds 27-06-2016

48,19

Over deze norm

Status Ingetrokken
Aantal pagina's 8
Gepubliceerd op 15-07-2003
Taal Engels
This practice covers the preparation and use of semiadiabatic calorimeters for measurement of absorbed dose and routine dosimeter calibration when irradiated with electrons for radiation processing applications. The calorimeters are either transported by a conveyor past a scanned electron beam or are stationary in a broadened beam. This practice applies to electron beams in the energy range from 1.5 to 12 MeV. The absorbed dose range depends on the absorbing material and the irradiation and measurement conditions. Minimum dose is approximately 100 Gy and maximum dose is approximately 50 kGy. The average absorbed.dose rate range shall generally be greater than 10 Gy·s-1. The temperature range for use of these calorimeters depends on the thermal resistance of the materials, on the calibrated range of the temperature sensor, and on the sen1itivity of the measurement device.

Details

ICS-code 17.240
Nederlandse titel Richtlijn voor het gebruik van calorimetrische dosimetriesystemen voor dosismetingen van elektronenbundels en kalibraties van dosimeters
Engelse titel Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen