Norm

ISO/DIS 11666:2017 en

Niet-destructief onderzoek van lassen - Ultrasoon onderzoek - Aanvaardbaarheidsniveaus

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 18
Commissie Niet-Destructief onderzoek
Gepubliceerd op 11-03-2017
Taal Engels
This International Standard specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in this International Standard as ultrasonic testing is generally not requested for this weld quality. These acceptance levels are applicable to testing carried out in accordance with ISO 17640. This International Standard applies to the examination of full penetration ferritic steel welds, with thicknesses from 8 mm to 100 mm. It can also be used for other types of welds, materials and thicknesses, provided the examinations have been performed with necessary consideration of the geometry and acoustic properties of the component, and an adequate sensitivity can be employed to enable the acceptance levels of this International Standard to be applied. The nominal frequency of probes used in this International Standard is between 2 MHz and 5 MHz unless attenuation or requirements for higher resolution call for other frequencies. The use of these acceptance levels in conjunction with frequencies outside this range needs to be considered carefully.

Details

ICS-code 25.160.40
Nederlandse titel Niet-destructief onderzoek van lassen - Ultrasoon onderzoek - Aanvaardbaarheidsniveaus
Engelse titel Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen