Norm

ISO/DIS 13506-1:2016 en

Beschermende kleding tegen hitte en vlammen - Deel 1: Beproevingsmethode voor de complete kleding uitrusting - Bepaling van de overgedragen energie met gebruik van een geïnstrumenteerde beproevingspop

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 43
Gepubliceerd op 01-07-2016
Taal Engels
This International Standard specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration fires. This test method establishes a system to characterize the thermal protection provided by garments (e.g. fire fighter or industrial garments in the form of single or multi-layered fabrics (coated, quilted, multi-layered, sandwich constructions, and other similar combinations), based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. For the purposes of this test method, the incident heat flux is limited to a nominal level of 84 kW/m2 and limited to exposure durations of 3 s to 12 s dependant on the thermal insulating capability of the garment. The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution. This test method allows for a visual evaluation, observation and inspection on the overall behaviour of the test specimen during and after the exposure as the garment or complete ensemble on the manikin is recorded before, during and after the flame exposure. This also applies to the evaluation of protection for the hands or the feet when they do not contain sensors. For the interfaces of ensembles tested, the test method is limited to visual inspection. The effects of body position and movement are not addressed in this test method. The heat measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2). This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions.

Details

ICS-code 13.340.10
Nederlandse titel Beschermende kleding tegen hitte en vlammen - Deel 1: Beproevingsmethode voor de complete kleding uitrusting - Bepaling van de overgedragen energie met gebruik van een geïnstrumenteerde beproevingspop
Engelse titel Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen