Over deze norm
1.1 ISO/DIS 16093 specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines, as defined in clause 3 of this standard, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a sawing tool. This standard is only applicable for stationary sawing machines. 1.2 This International standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 1.3 This International standard covers the significant hazards indicated in clause 4 and applies also to the ancillary devices (i.e. handling equipment for work pieces, chip conveyor) which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 1.4 This International standard applies to (metal) sawing machines which are manufactured after the date of publication of this International Standard. 1.5 When additional processing (i.e. milling, boring, marking, finishing operation etc.) is considered, this international standard can serve as a basis for safety requirements. For more detailed information refer to Bibliography.
||Gereedschapsmachines - Veiligheid - Zaagmachines voor koudmetaal
||Machine tools - Safety - Sawing machines for cold metal