Norm

ISO/DIS 16332:2015 en

Dieselmotoren - Brandstoffilters - Methode voor het beoordelen van het brandstof/waterafscheidingrendement

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 34
Commissie Wegvoertuigen
Gepubliceerd op 18-06-2015
Taal Engels
This International Standard specifies a fuel/water separator comparison test under defined and simplified laboratory conditions. This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout. The rated flow (in litres per hour) is intended for the range between 50 l/h and 1500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures may be used for fuel/water separators with higher or lower flow rates. A second test method, which represents the installation and running conditions of a fuel/water separator in the application as close as possible is under development and will be introduced within the next revision of ISO 16332

Details

ICS-code 43.060.40
Nederlandse titel Dieselmotoren - Brandstoffilters - Methode voor het beoordelen van het brandstof/waterafscheidingrendement
Engelse titel Diesel engines - Fuel filters - Method for evaluating fuel/water separation efficiency

Winkelwagen

Subtotaal:

Ga naar winkelwagen