Norm

ISO/DIS 17396:2016 en

Synchronous belt drives - Metric pitch - Tooth profiles T and AT endless and open ended belts and pulleys

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 21
Commissie Transporteurs
Gepubliceerd op 21-12-2016
Taal Engels
This International Standard specifies the principal characteristics of synchronous endless and open belts and pulleys of the profile systems T and AT for use in synchronous belt drives1) for mechanical power transmission and where positive indexing or synchronization can be required. The principal belt and pulley characteristics include a) nominal belt tooth dimensions; b) belt tooth pitch spacing; c) belt length and width dimensions, d) belt length measurement specifications, e) pulley groove dimensions and tolerances, f) pulley diameter and width dimensions and tolerances; and g) pulley quality specification. The belts of the profile systems T and AT are made of polyurethane with high-tension fine steel cord tension members in most cases. As far as certain forces are given in this International Standard, these values are only valid for this kinds of belt. For polyurethane belts with different tensile cords, i.e. aramid or rubber belts reinforced with glass fibre, the values can be different. It is intended that the user and the manufacturer agree about suitable values. Open belts made of thermoplastic polyurethane can be spliced to work as endless belts in conveyor applications. In this case, the tolerances are not valid for the splicing area of the endless spliced belt

Details

ICS-code 21.220.10
Nederlandse titel Synchronous belt drives - Metric pitch - Tooth profiles T and AT endless and open ended belts and pulleys
Engelse titel Synchronous belt drives - Metric pitch - Tooth profiles T and AT endless and open ended belts and pulleys

Winkelwagen

Subtotaal:

Ga naar winkelwagen