Norm

ISO/DIS 17543-1:2014 en

Gereedschapsmachines - Beproevingsomstandigheden voor spindelkoppen - Deel 1: machines met horizontale spindels

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 56
Commissie Metaalbewerkingsmachines
Gepubliceerd op 25-08-2014
Taal Engels
This part of ISO 17543 specifies, with reference to ISO 230-1, the geometric tests and, with reference to ISO 230-2, positioning tests for accessory spindle heads used on machining centres or numerically controlled milling machines, etc., where applicable, with horizontal spindle (i.e. horizontal Z-axis). The tests considered in this part of ISO 17543 may also be used with manual indexing heads, if applicable. Grinding heads are not included in the scope of this part of ISO 17543. This part of ISO 17543 deals only with the verification of geometric and positioning accuracy of the accessory spindle heads and does not apply to the testing of the machine’s head(s) operation (e.g. vibration, abnormal sound noise level, stick slip motion of components) nor to machine’s spindle head(s) characteristics (e.g. speeds, feeds and accelerations), which should generally be checked separately, nor to the verification of the machining capability under power. Tests concerning the accuracy of finished test pieces are dealt with in other ISO standards.

Details

ICS-code 25.080.20
Nederlandse titel Gereedschapsmachines - Beproevingsomstandigheden voor spindelkoppen - Deel 1: machines met horizontale spindels
Engelse titel Machines tools - Test conditions for accessory spindle heads - Part 1: Horizontal spindle machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen