Over deze norm
This international standard describes laboratory test methods to determine the resistance of materials, closures, and seams used in personal protective equipment (PPE) to permeation by solid or liquid chemicals with low vapour pressure (less than 1 mm Hg at 25°C) and/or insolubility in water or other liquids that do not interact with the PPE material. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is suitable for field strength and concentrated pesticide formulations as well as other mixtures in which the active ingredient is a chemical with low vapour pressure and/or low solubility in commonly used liquid and gaseous collection media. This test method is not intended to be used in place of standards such as ISO 6529, EN 16523-1, and AS/TM 739, which use liquid and gaseous collection media. This test method is not suitable for measurement of volatile chemicals that may evaporate before the chemical analysis is complete. The degree of contamination depends on numerous factors, such as type of exposure, application technique, and pesticide formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of PPE materials for different durations. This method is designed to measure cumulative permeation. Breakthrough time cannot be measured by this method. This test method does not measure resistance to penetration or degradation. The test method standard can be used for the evaluation of PPE materials that are new or those that have undergone treatment, such as laundering or simulated abrasion. Details of the treatment shall be reported.
||Beschermende kleding - Bescherming tegen chemicaliën - Bepalen van cumulatieve permeatie van chemicaliën met een lage dampdruk door materiaal
||Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials