Norm

ISO/DIS 247:2015 en

Rubber - Bepaling van het asgehalte

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 7
Commissie Rubber
Gepubliceerd op 20-05-2015
Taal Engels
This International Standard specifies three methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or vulcanized rubbers of the M, N, O, R and U families described in ISO 1629, except that: - Method A shall not be used for the determination of ash from compounded or vulcanized rubbers containing chlorine, bromine or iodine. - Method B shall be used for compounded or vulcanized rubbers containing chlorine, bromine or iodine. lt shall not be used for uncompounded rubbers. - Method C is intended to be used for the determination of ash from raw rubber by wrapping the test portion in ashless filter paper. - Lithium and fluorine compounds may react with silica crucibles to form volatile compounds, giving low ash results. Platinum crucibles shall therefore be used for ashing fluorine-containing and Iithium-polymerized rubbers. This International Standard does not cover the interpretation of the ash results as to the inorganic chemical content of a compound or vulcanizate. This is the responsibility of the analyst, who has to be aware of the behaviour of rubber additives at elevated temperatures. The three methods of ashing do not give identical results in all cases, and it is necessary to state in the test report the method of ashing employed.

Details

ICS-code 83.060
Nederlandse titel Rubber - Bepaling van het asgehalte
Engelse titel Rubber - Determination of ash
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen