Norm

ISO/DIS 4386-3:2016 en

Glijlagers- metalem meerlagige glijlagers- Deel 3: Niet-destructieve beproeving met penetratievloeistof

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 11
Gepubliceerd op 01-06-2016
Taal Engels
This part of ISO 4386 specifies a non-destructive penetrant testing for determining bond defects and discontinuities in the sliding surface of the bearing. The penetration method is used to detect a) bond defects in the transitional area between the bearing backing/bearing material on the end faces and joint faces of multilayer plain bearings which cannot be detected by the ultrasonic testing method specified in ISO 4386-1; b) discontinuities in the sliding surface of the bearing. The penetration method is applicable, in principle, to finished multilayer plain bearings. The bond test can be carried out only on cast multilayer plain bearings, with a backing consisting of steel, cast steel or cast bronze. Bearing backings which cannot be tin-plated, or only with difficulty, such as perlitic cast iron, rust-resistant steel and cast aluminium, cannot be tested since no bond is possible between the bearing material and bearing backing.

Details

ICS-code 21.100.10
Nederlandse titel Glijlagers- metalem meerlagige glijlagers- Deel 3: Niet-destructieve beproeving met penetratievloeistof
Engelse titel Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen