Norm

ISO/DIS 6164:2016 en

Hydrauliek - vierbouts, eendelige vierkante flensverbindingen voor gebruik bij drukken van 42 MPa, DN 10 tot 80 

  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ontwerp
Aantal pagina's 20
Commissie Hydrauliek en pneumatiek
Gepubliceerd op 01-06-2016
Taal Engels
This International Standard gives general and dimensional specifications for flanged heads, flange clamps, ports and mounting surfaces applicable to four-screw, one-piece square flange clamp type tube connectors and hose fittings for use at the pressure of 42 MPa (420 bar 1)). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals. These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors. Surges of pressure higher than the nominal ratings will reduce the ability of the flange connections to retain the hydraulic fluid. This should be taken into account in the design of the hydraulic system. WARNING - Users of ISO 6164 shall ensure that suitable material is chosen for the port to maintain the required working pressure, if carbon steel is not used. Also, the tube material and wall thickness depend on the selected working pressure and tube diameter. Tube dimensions shall be calculated in accordance with ISO 10763.

Details

ICS-code 23.100.40
Nederlandse titel Hydrauliek - vierbouts, eendelige vierkante flensverbindingen voor gebruik bij drukken van 42 MPa, DN 10 tot 80 
Engelse titel Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 10 to 80
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen