Norm

ISO/TS 17671-5:2004 en

Lassen - Aanbevelingen voor het lassen van metalen - Deel 5: Lassen van geplateerde staalsoorten

48,19

Over deze norm

Status Definitief
Aantal pagina's 8
Commissie Lassen en verwante processen
Gepubliceerd op 25-05-2004
Taal Engels
This part of ISO/TR 17671 gives general recommendations for welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels and is appropriate regardless of the type of fabrication involved, although the application standard may have additional requirements. Non-ferrous claddings, such as titanium, tantalum, zirconium and their alloys are not covered by this part of ISO/TR 17671. Examples for joint preparation are given in ISO 9692-4. This part of ISO/TR 17671 covers welding of cladding deposits as well as welding of the transition zone(s), when existing, between parent metal and cladding. These transition zones are metal combinations of nonalloyed ferrous parent metal with high alloyed stainless steels, nickel alloys or other non-ferrous metals. The mechanical and physical design of the joints is not covered by this part of ISO/TR 17671. Methods of testing and acceptance levels are not included because they depend on the service conditions of the fabrication. These details should be obtained from the design specification. The corrosion resistance of the cladding depends on many factors and is not part of this part of ISO/TR 17671. For general guidelines see ISO/TR 17671-1.

Details

ICS-code 25.160.10
Nederlandse titel Lassen - Aanbevelingen voor het lassen van metalen - Deel 5: Lassen van geplateerde staalsoorten
Engelse titel Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steels

Winkelwagen

Subtotaal:

Ga naar winkelwagen