Norm

NEN 11003-1:1993 en;fr

Industriële regelsystemen - Instrumenten met analoge ingangen en twee- of meervoudige-toestands uitgangen - Deel 1: Methoden voor de bepaling van de prestatie

  • Deze norm is ingetrokken sinds 01-04-2004

141,25

Over deze norm

Status Ingetrokken
Aantal pagina's 60
Commissie Industrieel meten, regelen en automatiseren
Gepubliceerd op 01-09-1993
Taal Engels, Frans
This Standard is applicable to pneumatic and electric industrial-process instruments using measured values that are continuous signals in accordance with current international standards. The other input value (i.e. the set point value) may be either a mechanical (position, force, etc.) or a standard signal. It should be noted that while the tests specified herein cover instruments having such measured values, they can be applied in principle to instruments having other continuous measuredvalues. These instruments may be used as controllers or as switches for alarm and other similar purposes. The following wordings and letter symbols are in accordance with the use as controllers and can be easily adopted for switches. Instruments with feedback are not covered by this standard.

Details

ICS-code 25.040.40
Nederlandse titel Industriële regelsystemen - Instrumenten met analoge ingangen en twee- of meervoudige-toestands uitgangen - Deel 1: Methoden voor de bepaling van de prestatie
Engelse titel Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating the performance
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen