Norm

NEN-EN 10025-5:2014 2e Ontw. en

Warmgewalste producten van constructiestaal - Deel 5: Technische leveringsvoorwaarden voor weervast constructiestaal

29,20

Over deze norm

Status Ontwerp
Aantal pagina's 24
Gepubliceerd op 01-06-2014
Taal Engels
Part 5 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance in the grades and qualities given in Tables 2 and 3 (chemical composition) and Tables 4 and 5 (mechanical properties) in the usual delivery conditions as given in 6.3. The thicknesses in which products of the steel grades and qualities specified in this document may be supplied are given in Table 1. In addition to prEN 10025-1:2010 the steels specified in this document are especially intended for use in welded, bolted and riveted components which shall have enhanced resistance to atmospheric corrosion, for service at ambient temperatures (subject to the restrictions described in 7.4.1). The steels specified in this Part 5 are not intended to be heat treated except products delivered in the delivery condition +N. Stress relief annealing is permitted. Products delivered in +N condition can be hot formed and/or normalized after delivery.

Details

ICS-code 77.140.10
77.140.50
Nederlandse titel Warmgewalste producten van constructiestaal - Deel 5: Technische leveringsvoorwaarden voor weervast constructiestaal
Engelse titel Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen