Norm

NEN-EN 10271:1996 Ontw. en

Elektrolytisch met zink-nikkel (ZN) beklede koudgewalste platte staalprodukten - Technische leveringsvoorwaarden

  • Deze norm is ingetrokken sinds 01-12-1998
  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ingetrokken
Aantal pagina's 33
Commissie Vervormingsstaal
Gepubliceerd op 01-04-1996
Taal Engels
Specifies requirements for continuously electrolytic zinc-nickel coated cold rolled flat products of low carbon steels suitable for cold forming according to table 1 and table 2 in rolled widths ≥ 600 mm and thicknesses from 0,35 mm up to and including 3 mm, delivered as strip (in coil form), sheet, slit strip or cut lenghts obtained from slit strip or sheet. The coating is nominally composed of Zn with a Nicontent of 12 % ± 1,5 %. This Standard may also be applied to continuously electrolytic zinc-nickel coated cold rolled flat products of a) steels according to EN 10139 (cold rolled strip in rolled widths < 600 mm), b) other types of low carbon steel for cold forming, c) steels normally characterized by minimum yield strength values in addition to formability parameters, e.g. - steels with high yield strength and improved formability according to prEN 10268 or other microalloyed steels, - phosphorous alloyed steels and bake-hardening steels, - general purpose structural steels.

Details

ICS-code 77.140.50
Nederlandse titel Elektrolytisch met zink-nikkel (ZN) beklede koudgewalste platte staalprodukten - Technische leveringsvoorwaarden
Engelse titel Electrolytically zinc-nickel (ZN) coated cold rolled steel flat products - Technical delivery conditions
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen