Norm

NEN-EN 10346:2013 Ontw. en

Continu-dompelbeklede platte staalproducten - Technische leveringsvoorwaarden

  • Deze norm is ingetrokken sinds 28-07-2015

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 38
Commissie Vervormingsstaal
Gepubliceerd op 01-04-2013
Taal Engels
This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction, of steels with high proof strength for cold forming and coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), aluminium-silicon alloy (AS) or zinc-magnesium alloy (ZM) and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or zinc-magnesium alloy (ZM) in thicknesses of 0,20 mm ≤ t < 3,0 mm. By agreement at the time of enquiry and order, this European Standard is applicable to continuously hot-dip coated flat products of an expanded validity range defined for thicknesses t < 0,20mm or in thicknesses 3,0mm < t < 6,5mm with agreed mechanical properties and test specimens, adhesion of coating and surface condition requirements. The thickness is the final thickness of the delivered product after coating. This document applies to strip of all widths and to sheets cut from it (≥ 600 mm width) and cut lengths (< 600 mm width).

Details

ICS-code 77.140.50
Nederlandse titel Continu-dompelbeklede platte staalproducten - Technische leveringsvoorwaarden
Engelse titel Continuously hot-dip coated steel flat products - Technical delivery conditions
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen