Norm

NEN-EN 10355:2011 Ontw. en

Chemische analyse van ijzer en staal - Optische emissie spectrometrie met inductief gekoppeld plasma van laag-gelegeerd staal - Bepaling van Si, Mn, P, Cu, Ni, Cr, Mo, en Sn [Routinemethode]

35,70

Over deze norm

Status Ontwerp
Aantal pagina's 39
Commissie Chemische analyse van ijzer en staal
Gepubliceerd op 01-12-2011
Taal Engels
This document specifies an inductively coupled plasma optical emission spectrometry routine method for the analysis of unalloyed and low alloyed steels, whose iron content shall be at least 95 %. This method is applicable to the elements listed in Table 1 within the ranges shown. The sample preparation described can't completely dissolve samples having a combination of high chromium and substantial carbon. This incomplete dissolution can also affect the determination of manganese and molybdenum in these samples. For this reason, the scope of the method is limited to chromium contents ≤ 0,9 %.

Details

ICS-code 77.040.30
Nederlandse titel Chemische analyse van ijzer en staal - Optische emissie spectrometrie met inductief gekoppeld plasma van laag-gelegeerd staal - Bepaling van Si, Mn, P, Cu, Ni, Cr, Mo, en Sn [Routinemethode]
Engelse titel Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn [Routine method]
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen