Norm

NEN-EN 1071-3:2000 Ontw. en

Technische keramiek - Beproevingsmethoden voor keramische deklagen - Deel 3: Bepaling van de hechting en ander mechanisch falen met een krasproef

  • Deze norm is ingetrokken sinds 07-04-2004

36,24 43,85 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 42
Commissie Technische keramiek
Gepubliceerd op 01-12-2000
Taal Engels
This Part of EN 1071 describes a method of testing ceramic coatings by scratching with a loaded diamond stylus so as to promote adhesive and/or cohesive failure of the coating-substrate system. The test is suitable for evaluating ceramic coatings up to a thickness of 20 ┬Ám and can also be suitable for evaluating other coating types and thicknesses. The test is intended for use with specimens of limited surface roughness. The standard is intended for use in the macro (1 - 100 N) load range. The procedures can also be applicable to other load ranges. However, appropriate calibration is essential if the normal loads at which failure events occur are to be quantified.

Details

ICS-code 81.060.30
Nederlandse titel Technische keramiek - Beproevingsmethoden voor keramische deklagen - Deel 3: Bepaling van de hechting en ander mechanisch falen met een krasproef
Engelse titel Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test

Winkelwagen

Subtotaal:

Ga naar winkelwagen