Over deze norm
This standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures 1) - above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships, - inside a watertight compartment below freeboard deck, - with direct connection to the outboard (not permitted below freeboard deck), - inside tanks as long as these are not filled with foreign media and are not cargo tanks. On well-anchored maritime structures, this standard applies to pipes and fittings of longitudinally welded stainless steel pipe with spigot and socket used in drainage systems in the living area. For other pipes, this standard only applies if agreed with the relevant operators and following prior consultation with the manufacturer. This standard contains a designation system for the different types of pipes and fittings for easy identification of each component. This standard is only applicable in conjunction with EN 1124-1.
|Nederlandse titel||Buizen en hulpstukken van in de langsnaad gelaste corrosievaste stalen buizen met spie-mofverbinding voor riolering - Deel 4: Onderdelen voor rioleringen onder onderdruk en voor rioleringen op schepen|
|Engelse titel||Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for Vacuum drainage systems and for drainage systems on ships|
|Vervangen door||Normatieve verwijzingen||