Norm

NEN-EN 12012-4:2004 Ontw. en

Machines voor rubber en kunststoffen - Verkleiningsmachines - Deel 4: Veiligheidseisen voor agglomeratoren

  • Deze norm is ingetrokken sinds 11-12-2006

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 19
Commissie Rubber- en kunststofmachines
Gepubliceerd op 01-10-2004
Taal Engels
This standard specifies the essential safety requirements applicable to the design and construction of agglomerators (sometimes called densifiers) used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows: - the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber; and - the outer edge of the discharge opening or the interface between the agglomerator chamber and the discharge system. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. This standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This standard does not deal with hazards caused by upstream and/or downstream equipment. This standard applies to agglomerators, manufactured after the date of approval of this standard by CEN.

Details

ICS-code 83.200
Nederlandse titel Machines voor rubber en kunststoffen - Verkleiningsmachines - Deel 4: Veiligheidseisen voor agglomeratoren
Engelse titel Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen