Norm

NEN-EN 12013:2018 en

Machines voor kunststoffen en rubber - Interne mengers - Veiligheidseisen

99,98 120,98 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 70
Commissie Rubber- en kunststofmachines
Gepubliceerd op 01-01-2018
Taal Engels
NEN-EN 12013 deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of internal mixers during all phases of the machine life cycle (see EN ISO 12100:2010, 5.4), irrespective of their size and of the control modes of the feeding door and discharge door, for production and laboratory applications, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). An internal mixer for production and a tandem mixer with manual feeding begins at the feeding door and ends at the lower edge of the material discharge opening. An internal mixer for production and a tandem mixer with automatic feeding begins at the conveyor, which is an integral part of the machine, and ends at the lower edge of the material discharge opening. A laboratory internal mixer begins at the feeding door and ends at the material container, which is an integral part of the mixer. With regard to noise emission measurement and declaration, only laboratory mixers are covered. Explosion hazards are not dealt with in this document.

Details

ICS-code 83.200
Nederlandse titel Machines voor kunststoffen en rubber - Interne mengers - Veiligheidseisen
Engelse titel Plastics and rubber machines - Internal mixers - Safety requirements
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen