Norm

NEN-EN 12020-1:2001 en

Aluminium en aluminiumlegeringen - Geëxtrudeerde precisieprofielen van legeringen EN AW-6060 en EN AW-6063 - Deel 1: Technische leveringsvoorwaarden

  • Deze norm is ingetrokken sinds 07-04-2008

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 11
Commissie Non-ferro
Gepubliceerd op 01-05-2001
Taal Engels
This part specifies the technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded, precision profiles manufactured with and without a thermal barrier. This applies to as extruded products supplied without further surface treatment. Precision profiles covered in this standard are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics: - they are mainly for architectural applications; - they meet more stringent requirements regarding the surface condition of visible surfaces; - the maximum diameter of the circumscribing circle is greater than 300 mm; - they are made to closer tolerances on dimensions and form. In the case of profiles which, due to the complexity of their design are difficult to manufacture and specify, special agreements between purchaser and manufacturer need to be reached.

Details

ICS-code 77.150.10
91.080.10-20
Nederlandse titel Aluminium en aluminiumlegeringen - Geëxtrudeerde precisieprofielen van legeringen EN AW-6060 en EN AW-6063 - Deel 1: Technische leveringsvoorwaarden
Engelse titel Aluminium and aluminium alloys - Extruded precision profiles in alloy EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen