Norm

NEN-EN 12102:2012 Ontw. en

Luchtbehandelingsapparatuur, koeleenheden voor vloeistof en warmtepompen met elektrisch aangedreven compressoren voor verwarmen en koelen van een ruimte - Meting van luchtgeluid - Bepaling van het geluidvermogenniveau

  • Deze norm is ingetrokken sinds 06-08-2013

29,20

Over deze norm

Status Ingetrokken
Aantal pagina's 25
Commissie Koelinstallaties en warmtepompen
Gepubliceerd op 01-12-2012
Taal Engels
This European Standard establishes requirements for determining, in accordance with a standardized procedure, the sound power level emitted into the surrounding air by air conditioners, heat pumps, liquid chilling packages with electrically driven compressors when used for space heating and/or cooling, including water cooled multisplit systems, as described in FprEN 14511:2012 and dehumidifiers as described in EN 810:1997. This standard also covers the measurement of the sound power level of evaporatively-cooled condenser air conditioners, as defined in EN 15218:2012. However, the measurement shall be done without external water feeding and these units will thus be considered as the other air conditioners covered by EN 14511:2012. It is emphasised that this measurement standard only refers to airborne noise. This European Standard offers ways to determine the sound power level of units. Some of them are specifically adapted to provide results with low uncertainties, by using laboratory class acoustic methods and highly controlled working conditions. Those measurements are suitable for certification, labelling and marking purposes. In some cases, the target and/or the environment of the measurements do not allow such precision-class methods. This European Standard also offers ways to assess sound power levels with acceptable accuracy even though acoustic methods and/or working conditions are not laboratory-type, e.g. in situ or quality control measurements. This European Standard gives two classes of measurements and results, according to the test environment: - Class A measurements correspond to controlled working conditions (standard or application rating conditions). It is defined by the respect to the tolerances of Table 2 and shall be used for the conformity to requirements of the Commission Regulation (EC) No 206/2012 of 6 March 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners - Class B measurements correspond to the case where the range defined by the tolerances of Table 2 cannot be fulfilled. In both classes, precision or engineering class acoustic methods should be applied. The choice of the acoustic measurement method is done in accordance with EN ISO 3740 and EN ISO 9614 depending on the type of surrounding acoustic fields (diffuse or free field, enclosed or open space), and the available instrumentation. Whatever the current working conditions, the reference of acoustic standard shall be reported, with explicit mention of its accuracy class. Three methods for determining the sound power levels are specified in order to avoid unduly restricting existing facilities and experience: - the first methodology is based on reverberation room measurement (see EN ISO 3741, EN ISO 3743 and EN ISO 3747 in some favourable cases when the engineering grade can be fulfilled); - the second method is based on measurements in an essentially free field over a reflecting plane (see EN ISO 3744 and EN ISO 3745); - the third method is based on sound intensity measurement (see EN ISO 9614) in preferably free field environment. The necessity to regulate the test conditions obviously leads to recommend test methods implemented in acoustically designed (enclosed) spaces, such as EN ISO 3741, EN ISO 3743, EN ISO 3745 and also EN ISO 9614 when implemented in an enclosed space. The open spaces should be covered only in specific cases, e.g. when the size or the power of the unit under test cannot be managed by standard test rooms. Suitable test methods are EN ISO 3744 and EN ISO 9614.

Details

ICS-code 17.140.20
27.080
27.200
91.140.30
Nederlandse titel Luchtbehandelingsapparatuur, koeleenheden voor vloeistof en warmtepompen met elektrisch aangedreven compressoren voor verwarmen en koelen van een ruimte - Meting van luchtgeluid - Bepaling van het geluidvermogenniveau
Engelse titel Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
Vervangt
Vervangen door
Normatieve verwijzingen
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,
  • ,

Winkelwagen

Subtotaal:

Ga naar winkelwagen