Over deze norm
This standard deals with power operated temporarily installed builders hoists intended for use by persons who are permitted to enter sites of engineering and construction, serving either one upper landing or a work area extending to the end of the guides, (e.g. a roof) having a load carrying device (lcd): - which is designed for the transportation of goods only, - which is designed so that there is no need to step on it for loading or unloading purposes or for maintenance, erection and dismantling, - from which persons are prohibited at any time, - which is guided, - which is designed to travel at an angle of at least 30 degrees to the vertical but may be used at any angle, - which is sustained by steel wire rope and a positive drive system, which is controlled by constant pressure type controls, - which does not benefit from the use of any counterweight, - which has a maximum rated load of 300 kg, - which has a maximum speed of 1,00 m/sec, and where the guides require support from separate structures. The standard identifies hazards arising during the various phases in the life of such equipment and describes methods for the elimination of reduction of these hazards.
|Nederlandse titel||Bouwliften voor goederenvervoer - Deel 2: Hellend opgestelde liften met niet-toegankelijke lastdragende inrichtingen|
|Engelse titel||Builders hoist for the transport of goods - Part 2: Inclined hoists with non-accessible load carrying devices|
|Vervangen door||Normatieve verwijzingen||