Norm

NEN-EN 12201-1:2010 Ontw. en

Kunststofleidingsystemen voor de drinkwatervoorziening, en voor de afvoer en riolering onder druk - Polyetheen (PE) - Deel 1: Algemeen

  • Deze norm is ingetrokken sinds 19-09-2011

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 19
Commissie Kunststofleidingsystemen
Gepubliceerd op 01-01-2010
Taal Engels
This Part of EN 12201 specifies the general aspects of polyethylene (PE) pressure piping systems (mains and service pipes) for buried or above ground applications, intended for the conveyance of water for human consumption, including raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes It also specifies the test parameters for the test methods referred to in this standard. In conjunction with Parts 2 to 5 of EN 12201, it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar 1); b) an operating temperature of 20 °C as a reference temperature; c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. EN 12201 covers a range of allowable operating pressures and gives requirements concerning colours and additives.

Details

ICS-code 23.040.01
23.040.20
91.140.60
93.030
Nederlandse titel Kunststofleidingsystemen voor de drinkwatervoorziening, en voor de afvoer en riolering onder druk - Polyetheen (PE) - Deel 1: Algemeen
Engelse titel Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen