Norm

NEN-EN 12201-5:2010 Ontw. en

Kunststofleidingsystemen voor de drinkwatervoorziening, en voor de afvoer en riolering onder druk - Polyetheen (PE) - Deel 5: Geschiktheid voor toepassing van het systeem

  • Deze norm is ingetrokken sinds 14-09-2011

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 13
Commissie Kunststofleidingsystemen
Gepubliceerd op 01-01-2010
Taal Engels
This Part of EN 12201 specifies the characteristics of the fitness for purpose of the assembled piping systems intended for the conveyance of water intended for human consumption, including raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. It also specifies the method of preparation of test piece joints, and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with Parts 1 to 4 of EN 12201 it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar; b) an operating temperature of 20 °C as a reference temperature. c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. EN 12201 covers a range of allowable operating pressures and gives requirements concerning colours and additives.

Details

ICS-code 23.040.01
Nederlandse titel Kunststofleidingsystemen voor de drinkwatervoorziening, en voor de afvoer en riolering onder druk - Polyetheen (PE) - Deel 5: Geschiktheid voor toepassing van het systeem
Engelse titel Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen