Norm

NEN-EN 12373-5:1998 en

Aluminium en aluminiumlegeringen - Anodiseren - Deel 5: Beoordeling van de kwaliteit van gesloten, anodisch aangebrachte oxidelagen door het meten van de admittantie

  • Deze norm is ingetrokken sinds 12-07-2010

34,50

Over deze norm

Status Ingetrokken
Aantal pagina's 8
Commissie Metallieke deklagen
Gepubliceerd op 01-12-1998
Taal Engels
Specifies a method for assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the admittance. The method is applicable to anodic oxidation coatings sealed in an aqueous medium. The method is suitable for use as a production control test and as an acceptance test where there is agreement between the supplier and the purchaser. Any type of anodized component may be tested by the method described, provided that there is sufficient area (a circle of about 20 mm diameter) and that the film thickness is greater than 3 ┬Ám.

Details

ICS-code 25.220.10
77.120.10
Nederlandse titel Aluminium en aluminiumlegeringen - Anodiseren - Deel 5: Beoordeling van de kwaliteit van gesloten, anodisch aangebrachte oxidelagen door het meten van de admittantie
Engelse titel Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
Vervangt
Wordt vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen