Norm

NEN-EN 12478:1996 Ontw. en

Veiligheid van gereedschapswerktuigen - Grote, numeriek bestuurde draaibanken en draaicentra

  • Deze norm is ingetrokken sinds 01-12-2000

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 41
Commissie Metaalbewerkingsmachines
Gepubliceerd op 01-08-1996
Taal Engels
Sets out the requirements and/or measures to remove or reduce the hazards and risks of numerically controlled large turning machines and turning centres as defined in subclauses 3.1 and 3.2 which are intended to work cold metal. This standard covers all significant hazards which are listed in clause 4. This standard is applicable to: - numerically controlled large vertical turning machines and turning centres which are generally equipped with work campling plate exceeding 1600 mm outside diameter. - numerically controlled horizontal spindle turning machines and turning centres which are generally equipped with work clamping devices exceeding 500 mm outside diameter and 2000 mm distance between centres. The standard also applies to ancillary handling devices (eg for workpieces, tools and work clamping devices) which are integral to the machine. This standard also applies to machines which are integrated in an automatic production line or turning cell in as much as the hzard and risks arising are comparable to those of machines working separately. This standard is primarily directed to machines which are manufactured after the date of issue of this standard. This standard is not applicable to manually controlled turning machines with machining facilities under NC-control (hybrid machines).

Details

ICS-code 25.080.10
Nederlandse titel Veiligheid van gereedschapswerktuigen - Grote, numeriek bestuurde draaibanken en draaicentra
Engelse titel Safety of machine tools - Large numerically controlled turning machines and turning centres
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen