Norm

NEN-EN 12573-1:1996 Ontw. en

Gelaste, niet-verplaatsbare, drukloze tanks van thermoplasten - Deel 1: Algemene grondslagen

  • Deze norm is ingetrokken sinds 01-10-2000

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 21
Commissie Opslagtanks van kunststof
Gepubliceerd op 01-10-1996
Taal Engels
Establishes general principles for welded static non-pressurised thermoplastic tanks. It applies to shop and site fabrications. The standard covers tanks with a capacity of 0,45 m3 (450 litres) and above. Tanks which comply the requirements of this standard are not intended to withstand internal pressure or vacuum, other than that which may occur during the transfer of fluids (including gases) in their normal operation. Allowable pressure/vacuum limits during the transfer are no more than + 0,0002/-0,0005 N/mm2 (+0,02/-0,0005 bar) respectively. This standard applies to tanks fabricated in the following thermoplastics: Polyethylene (PE);Polypropylene (PP);Poly(vinyl chloride) (PVC);Poly(vinylidene fluoride) (PVDF)

Details

ICS-code 23.020.10
Nederlandse titel Gelaste, niet-verplaatsbare, drukloze tanks van thermoplasten - Deel 1: Algemene grondslagen
Engelse titel Welded static non-pressurised thermoplastic tanks - Part 1: General principles
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen