Norm

NEN-EN 12618-3:2004 en

Producten en systemen voor de bescherming en reparatie van betonconstructies - Beproevingsmethoden - Deel 3: Bepaling van de hechting van inspuitproducten, met of zonder temperatuurwisselingen - Methode met schuine afschuiving

49,30

Over deze norm

Status Definitief
Aantal pagina's 13
Commissie Beton
Gepubliceerd op 01-08-2004
Taal Engels
This document describes the method for determining the slant shear bond strength of all injection products intended to restore the integrity of cracked concrete and covered by prEN 1504-5. The test may be performed upon cracks injected in the dry, damp, wet or with water flowing through them. It should always be carried out after the appropriate period of curing under the standard conditions of test detailed below, but may additionally be performed upon a further set of specimens after a period of artificial ageing by thermal cycling. Whilst the testing of the repaired crack is normally by short term static load, it may also be performed as a creep test by long term static load, or as a dynamic test by the application of a cyclic load.

Details

ICS-code 91.080.40
Nederlandse titel Producten en systemen voor de bescherming en reparatie van betonconstructies - Beproevingsmethoden - Deel 3: Bepaling van de hechting van inspuitproducten, met of zonder temperatuurwisselingen - Methode met schuine afschuiving
Engelse titel Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen