NEN-EN 12620:2011 Ontw. en

Toeslagmateriaal voor beton

  • Deze norm is ingetrokken sinds 22-05-2013


Over deze norm

Status Ingetrokken
Aantal pagina's 51
Commissie Korrelvormige materialen voor de bouw
Gepubliceerd op 01-03-2011
Taal Engels
This European Standard specifies the properties of aggregates obtained by processing natural, manufactured or recycled materials and mixtures of these aggregates for use in concrete. It covers aggregates having an oven dried particle density greater than 2,00 Mg/m3 (2000 kg/m3) for all concrete, including concrete in conformity with EN 206-1 and concrete used in roads and other pavements and for use in precast concrete products. It also covers recycled aggregate with particle densities between 1,50 Mg/m3 (1500 kg/m3) and 2,00 Mg/m3 (2000 kg/m3) with appropriate caveats and recycled fine aggregate with appropriate caveats. A list of the source materials that have been considered and are within the scope of this standard is given in Annex A (normative). It also specifies that a quality control system is in place for use in factory production control and it provides for the evaluation of conformity of the products to this European Standard. The Tables in this standard include categories which are common across the four main aggregate standards: EN 12620, EN 13043, EN 13139 and EN 13242. Only categories shaded grey are to be used for concrete, those in white background are not to be used and are for information only. It incorporates a general requirement that aggregates shall not release any dangerous substances in excess of the maximum permitted levels specified in a relevant European Standard for the material or permitted in the national regulations of the member state of destination. For materials from some other secondary sources, however, work is ongoing and the requirements are incomplete. In the meantime such materials, when placed on the market as aggregates, should conform fully to this standard but may also be required to conform to specific relevant additional requirements at the place of use. Additional characteristics and requirements may be specified on a case by case basis depending upon experience of use of the product, and defined in specific contractual documents.


ICS-code 91.100.15
Nederlandse titel Toeslagmateriaal voor beton
Engelse titel Aggregates for concrete
Normatieve verwijzingen
  • 89/106/EEG, Bouwproducten



Ga naar winkelwagen