Norm

NEN-EN 12629-7:2004+A1:2010 en

Machines voor de vervaardiging van bouwproducten van beton en kalkzandsteen - Veiligheid - Deel 7: Stationaire en mobiele uitrusting voor de vervaardiging van voorgespannen producten

98,50

Over deze norm

Status Definitief
Aantal pagina's 88
Commissie Mobiele bouwmachines
Gepubliceerd op 01-09-2010
Taal Engels
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to stationary and mobile equipment for the benched manufacture of prestressed products. The manufacturing bed is a machine with which other associated machines work simultaneously. Moreover, these machines are generally used on beds installed in parallel. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. This standard gives particular requirements for the design of the following machines: - Pre-stressing bed (schematic representation is given in annex A); - Bed sweeper, vacuum cleaner, oiler, wire-guide machine (schematic representation is given in annex B); - Bed layout machine (schematic representation is given in annex C); - Strand pushing/pulling machine (schematic representation is given in annex D); - Spinner, extruder, vibrodistributor (schematic representation is given in annex E); - Tarpaulin paying out and winding in machine (schematic representation is given in annex F); - Sawing machine (schematic representation is given in annex G). The concrete supply interface which is taken into account for safety is also considered. The sequence of these operations can be different according to the manufacturing process used in the factory and to the various types of products. The handling of the cut wires and their placement on beds is not covered by the present standard. This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Sub-clause 1.3 of EN 12629-1:2000+A1:2010 applies. This document is applicable to equipment for long-line manufacture of pre-stressed product which are manufactured after the date of publication of this document by CEN.

Details

ICS-code 91.220
Nederlandse titel Machines voor de vervaardiging van bouwproducten van beton en kalkzandsteen - Veiligheid - Deel 7: Stationaire en mobiele uitrusting voor de vervaardiging van voorgespannen producten
Engelse titel Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
Vervangt
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen