Norm

NEN-EN 12668-3:2013 Ontw. en

Niet-destructief onderzoek - Karakterisering en verificatie van apparatuur voor ultrasoon onderzoek - Deel 3: Volledige apparatuur

  • Deze norm is ingetrokken sinds 12-11-2013

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 10
Gepubliceerd op 01-05-2013
Taal Engels
This document describes methods and acceptance criteria for verifying the performance of ultrasonic equipment (i.e. instrument and probe combined as defined in EN 12668-1 and EN 12668-2) by the use of appropriate standard calibration blocks. These methods are not intended to prove the suitability of the equipment for particular applications. The methods described are suitable for the use by operators working under site or shop floor conditions. The methods only apply to pulse echo equipment using A-scan presentation, with gain controls or attenuators calibrated in steps not greater than 2 dB and used essentially in contact testing. These methods are specifically intended for manual testing equipment. For automated testing different tests can be needed to ensure satisfactory performance.

Details

ICS-code 19.100
Nederlandse titel Niet-destructief onderzoek - Karakterisering en verificatie van apparatuur voor ultrasoon onderzoek - Deel 3: Volledige apparatuur
Engelse titel Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen