Norm

NEN-EN 12814-3:1997 Ontw. en

Beproeving van gelaste verbindingen in halffabrikaten van thermoplasten - Deel 3: Kruipbeproeving op trek

  • Deze norm is ingetrokken sinds 31-07-2000

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 16
Commissie Kunststoffen
Gepubliceerd op 01-12-1997
Taal Engels
Specifies the dimensions, the method of sampling and the preparation of the test specimens, also the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long term tensile welding factor. A tenisle creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination..) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes, sheets, plates and profiles, but not reinforced, irrespective of the welding process used. The long term tensile welding factor(s), the crack behaviour and the appearance of the fracture surface provide information on the quality of the weld.

Details

ICS-code 25.160.40
83.080.20
Nederlandse titel Beproeving van gelaste verbindingen in halffabrikaten van thermoplasten - Deel 3: Kruipbeproeving op trek
Engelse titel Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen