Norm

NEN-EN 1289:1996 2e Ontw. en

Niet-destructief onderzoek van lassen - Penetrantonderzoek van lassen - Aanvaardbaarheidsniveau's

  • Deze norm is ingetrokken sinds 01-04-1998
  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ingetrokken
Aantal pagina's 7
Gepubliceerd op 01-08-1996
Taal Engels
Specifies aceptance levels for surface breaking imperfections in metallic welds detected by penetrant testing. It is primarily intended for use during manufacture, but where appropriate it may be used for in service inspection. It is not intended for use where special conditions prevail, for example examination of corroded surfaces for stress/corrosion cracks. The test surface is defined as the zone which includes the weld metal and the parent metal each side of the weld for a distance of 10mm, or the width of the heat affected zone, whichever is greater. The acceptance levels in this standard are based on detection capabilities that may be expected when using techniques specified in EN 571-1 and parameters recommended in Annex A of this standard. The acceptance levels defined in this document may be related to welding standards, application standards, specifications or codes. One such relationship is shown in prEN 12062 for EN 25817 and EN 30042.

Details

ICS-code 25.160.40
Nederlandse titel Niet-destructief onderzoek van lassen - Penetrantonderzoek van lassen - Aanvaardbaarheidsniveau's
Engelse titel Non destructive testing of welds - Penetrant testing of welds - Acceptance levels
Vervangt
Vervangen door
Normatieve verwijzingen
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen